Dating colonial buttons

The two parts were fastened together by turning the edge of the front shell over the back piece.Type III represents the staff buttons that are usually gilt, convex, with the device on a lined field.Antique buttons can be made out of just about anything, from antlers and bone to glass and ceramics to metals and stone.There are "Diminutive" buttons (less than 3/8" across) and "Large" buttons (greater than 1 1/4" wide), "Old" buttons (pre-1918), and "Modern/Vintage" ones (post-1918). Any unauthorized use of material contained here is strictly forbidden. Access Heritage Inc (formerly The Discriminating General) is in no way to be held accountable for the use of any content on this website.

Unfortunately there is a lack of information on the origin and design of this type of buttons in any available source.Any excavated relics have been recovered from private property with owners permission. Record of American Uniform and Historical Buttons, Bicentennial Edition, by Alphaeus H. Pictures are generally by the author, unless otherwise indicated, (21.6mm). SMITH & CO / (dot) NEW - YORK (dot)" rmdc, Scovill manufactured 1840s or 1850s, (Smith WH 110). Backmark: blank depressed channel, narrow flat area around shank with some variance of dimension, copper or brass wire shank, likely, (23.3mm).This information is available for research purposes, pictures may be used by permission only Most information on this page is from: Uniform Buttons of the United States 1776 - 1865, by Warren K. Dating buttons; A Chronology of Button Types, Makers, Retailers & Their Backmarks, by Warren K. Directory of American Military Goods Dealers & Makers, by Bruce S. Button depicts a coiled snake with motto "Don't tread on me", this is the earliest Georgia state seal dating from the colonial period to about 1830. Button depicts the state seal of Georgia, a dome bearing "Constitution" supported by three pillars, "Wisdom", "Justice", and "Moderation", intended for Georgia units. Button depicts the state seal of Georgia, a dome bearing "Constitution" supported by three pillars, "Wisdom", "Justice", and "Moderation", intended for Georgia units, southern wartime manufacture. Backmark: blank depressed narrow channel imperfectly formed, wide flat area around shank with some variance of dimension, copper wire shank, likely manufactured by Wildt, (blank southern manufacture 360). Backmark: blank depressed narrow channel imperfectly formed, wide flat area around shank with some variance of dimension, copper wire shank, likely manufactured by Wildt, (blank southern manufacture 360). Button depicts the state seal of Georgia, a dome bearing "Constitution" supported by three pillars, "Wisdom", "Justice", and "Moderation", intended for Georgia units, southern wartime manufacture.This type was first produced by the Scovill Company in the 1830's, for the army staff officers.The buttons are similar to the buttons of type II except that the front shell and back piece are held together by a separate narrow flat rim.

Search for dating colonial buttons:

dating colonial buttons-80dating colonial buttons-14

Leave a Reply

Your email address will not be published. Required fields are marked *

One thought on “dating colonial buttons”